March 19th, 2020
| Silver King $20.49 Silver King HF5SK471 1 Quart Hydronic Formula #5 Steam Boiler Cleaner Inhibitor With Silicone SK-471, Inhibits corrosion, removes dissolves insulating sludge. frees and lubricates stuck zone values, protects and lubricates entire system. Prevents clogging of automatic valves. Protects and lubricates pump seals, Quiets noisy boilers and circulators. Insures maximum heat transfer. Non-hazardous. Safe to use in all boilers and hydronic systems. Contains no petroleum. Compatible with propylene glycol and ethylene glycol anti-freeze. Use 1 qt. for each 30 gallons of system water. Hydronic formula #5 is scientifically formulated to clean and protect boilers and hydronic heating systems. Patented Hydronic #5 will maximize heating efficiency and prolong the useful life of the system. ....read more |
Silver King HF5SK471 1 Quart Hydronic Formula #5 Steam Boiler Cleaner Inhibitor With Silicone SK-471, Inhibits corrosion, removes dissolves insulating sludge. frees and lubricates stuck zone values, protects and lubricates entire system. Prevents clogging of automatic valves. Protects and lubricates pump seals, Quiets noisy boilers and circulators. Insures maximum heat transfer. Non-hazardous. Safe to use in all boilers and hydronic systems. Contains no petroleum. Compatible with propylene glycol and ethylene glycol anti-freeze. Use 1 qt. for each 30 gallons of system water. Hydronic formula #5 is scientifically formulated to clean and protect boilers and hydronic heating systems. Patented Hydronic #5 will maximize heating efficiency and prolong the useful life of the system.
....read more
Tags: Formula, HF5SK471, hydronic, King, Quart, Silver
Posted in Burnham Hydronics | No Comments »
March 2nd, 2020
| Badger Insulated Pipe $268.40 50,000 BTUs / 100 PSI Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling. New style makes your installation look much cleaner as both inlet and return pipes(The inlet/outlet ports are the same no matter which one you choose for hot or cold)come out next to each other on the top of the unit. This also makes the units much more efficent because no air becomes trapped in the unit. Other Sizes available,Units plug directly into a wall outlet! DOES NOT INCLUDE THERMOSTAT WITH THIS UNIT.Fan speed controlled with a Rheostat, which is included. These heat exchangers are to be hooked up to a boiler or a chilled water source. If using as a chilled water source, a drip pan will need to be provided by owner.BP-50Dimensions: Width = 15 ¾ Height = 12 Depth = 13 ½ including fan Outlet Port: 1 Weight = 24 lbs. - Shipping Weight = 32 lbs CFM =700 RHEOSTAT SPECS: *CURRENT CAPACITY: 15 AMPS*VOLTAGE CAPACITY: 120 AC*FUSE: 15 AMP*LINE CORD: 6 FT., 3-WIRE, DOUBLE INSULATED, 16 AWG, U.L. LISTED*PLUG: 3-POLE, AMERICAN (GROUNDED)*DIM: 4-3/8 (L) X 2-9/16 (W) X 2-3/4 (H)*WEIGHT: .95 LBS.These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units. These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow. We provide a 3 year warranty against manufacturer' ....read more |
50,000 BTUs / 100 PSI Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling.
New style makes your installation look much cleaner as both inlet and return pipes(The inlet/outlet ports are the same no matter which one you choose for hot or cold)come out next to each other on the top of the unit. This also makes the units much more efficent because no air becomes trapped in the unit.
Other Sizes available,Units plug directly into a wall outlet! DOES NOT INCLUDE THERMOSTAT WITH THIS UNIT.Fan speed controlled with a Rheostat, which is included.
These heat exchangers are to be hooked up to a boiler or a chilled water source.
If using as a chilled water source, a drip pan will need to be provided by owner.BP-50Dimensions:
Width = 15 ¾
Height = 12
Depth = 13 ½ including fan
Outlet Port: 1
Weight = 24 lbs. - Shipping Weight = 32 lbs
CFM =700
RHEOSTAT SPECS:
*CURRENT CAPACITY: 15 AMPS*VOLTAGE CAPACITY: 120 AC*FUSE: 15 AMP*LINE CORD: 6 FT., 3-WIRE, DOUBLE INSULATED, 16 AWG, U.L. LISTED*PLUG: 3-POLE, AMERICAN (GROUNDED)*DIM: 4-3/8 (L) X 2-9/16 (W) X 2-3/4 (H)*WEIGHT: .95 LBS.These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units.
These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow.
We provide a 3 year warranty against manufacturer' ....read more
Tags: Badger, Hanging, Heater, hydronic, Insulated, Pipe, STYLE, Variable, w/CORD
Posted in Burnham Hydronics | No Comments »
February 21st, 2020
| 654 Tekmar $596.68 Tekmar 654 Snow Melt Control - tekmarNet Electronic or Hydronic Boiler / Mixing ....read more |
Tekmar 654 Snow Melt Control - tekmarNet Electronic or Hydronic Boiler / Mixing
....read more
Tags: 654, Control, Electric, hydronic, Melting, Snow, Tekmar, tekmarNet
Posted in Burnham Hydronics | No Comments »
August 21st, 2019
| Brand: Cengage Learning $108.99 From simple applications to multi-load / multi-temperature systems, learn how to use the newest and most appropriate hydronic heating methods and hardware to create system the deliver the ultimate in heating comfort, reliability, and energy efficiency. Heavily illustrated with product and installation photos, and hundreds of detailed full-color schematics, MODERN HYDRONIC HEATING, 3rd EDITION is a one-of-a-kind comprehensive reference on hydronic heating for the present and future. It transforms engineering-level design information into practical tools that can be used by technical students and heating professional alike. This revised edition features the latest design and installation techniques for residential and light commercial hydronic systems including use of renewable energy heat sources, hydraulic separation, smart circulators, distribution efficiency, thermal accumulators, mixing methods, heat metering, and web-enabled control methods. Everyone involved in the heating trade will benefit from this preeminent resource of the North American heating industry. It is well-suited for use in a formal education course, self-study, or as an on the job reference. ....read more |
From simple applications to multi-load / multi-temperature systems, learn how to use the newest and most appropriate hydronic heating methods and hardware to create system the deliver the ultimate in heating comfort, reliability, and energy efficiency. Heavily illustrated with product and installation photos, and hundreds of detailed full-color schematics, MODERN HYDRONIC HEATING, 3rd EDITION is a one-of-a-kind comprehensive reference on hydronic heating for the present and future. It transforms engineering-level design information into practical tools that can be used by technical students and heating professional alike. This revised edition features the latest design and installation techniques for residential and light commercial hydronic systems including use of renewable energy heat sources, hydraulic separation, smart circulators, distribution efficiency, thermal accumulators, mixing methods, heat metering, and web-enabled control methods. Everyone involved in the heating trade will benefit from this preeminent resource of the North American heating industry. It is well-suited for use in a formal education course, self-study, or as an on the job reference.
....read more
Tags: Brand:, Cengage, Commercial, Heating, hydronic, Learning, Light, Modern, Residential
Posted in Burnham Hydronics | No Comments »
August 7th, 2019
| LAARS $3163.00 Laars NTH080NXN2 NeoTherm Hydronic Natural Gas Condensing Boiler with Pump 80k B ....read more |
Laars NTH080NXN2 NeoTherm Hydronic Natural Gas Condensing Boiler with Pump 80k B
....read more
Tags: Boiler, Condensing, hydronic, Laars, Natural, NeoTherm, NTH080NXN2
Posted in Burnham Hydronics | No Comments »
July 23rd, 2019
| Badger $238.70 50,000 BTUs / 100 PSI Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling. New style makes your installation look much cleaner as both inlet and return pipes come out next to each other on the top of the unit. This also makes the units much more efficent because no air becomes trapped in the unit. Other Sizes available,Units plug directly into a wall outlet! DOES NOT INCLUDE THERMOSTAT WITH THIS UNIT. Fan speed can be controlled with a Rheostat, available for purchase seperately. These heat exchangers are to be hooked up to a boiler or a chilled water source. If using as a chilled water source, a drip pan will need to be provided by owner. BP-50 Dimensions: Width = 15 ¾ Height = 12 Depth = 13 ½ including fan Outlet Port: 1 Weight = 24 lbs. - Shipping Weight = 32 lbs CFM =700 These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units. These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow. We provide a 3 year warranty against manufacturer's defects and corrosion. ....read more |
50,000 BTUs / 100 PSI Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling. New style makes your installation look much cleaner as both inlet and return pipes come out next to each other on the top of the unit. This also makes the units much more efficent because no air becomes trapped in the unit. Other Sizes available,Units plug directly into a wall outlet! DOES NOT INCLUDE THERMOSTAT WITH THIS UNIT. Fan speed can be controlled with a Rheostat, available for purchase seperately. These heat exchangers are to be hooked up to a boiler or a chilled water source. If using as a chilled water source, a drip pan will need to be provided by owner. BP-50 Dimensions: Width = 15 ¾ Height = 12 Depth = 13 ½ including fan Outlet Port: 1 Weight = 24 lbs. - Shipping Weight = 32 lbs CFM =700 These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units. These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow. We provide a 3 year warranty against manufacturer's defects and corrosion.
....read more
Tags: Badger, Hanging, Heater, hydronic, Speed, STYLE, Variable
Posted in Burnham Hydronics | No Comments »
July 15th, 2019
| FTH15 Flextrol $36.00 What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life. Technical Features - Certified synthetic SBR rubber diaphragm
- MIG welding eliminates interior rough spots and sharp edges
- Each tank is factory leak tested to ensure tank integrity
- All diaphragms designed to maximize drawdown
- External baked epoxy-polyester coating provides a durable appliance finish
- Welded side outlet allows easy and quick installation
- Protected pre charge valve eliminates potential leak path
- Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle
Additional Description - Shell: Carbon Steel
- Connection: Carbon Steel
- Diaphragm: SBR Synthetic Rubber
- Color: Gray
Operating Conditions - Max. Operating Pressure: 75 PSI
- Operating Temperature: 210 Degrees Fahrenheit
- Factory Precharge: 12 PSI
- Warranty: 1 Year
Specifications - Model Number: FTH15
- Tank Size: 2.1 Gallons
- Tank Weight: 4.6 Pounds
- Connection Size (National Pipe Thread): 1/2 Male Iron Pipe (MIP)
- Dimensions (LxWxH): 9 x 9 x 13
- Acceptance Volume: 1.4 Gallons
- UPC Code: 80459513060
....read more |
What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life.
Technical Features
- Certified synthetic SBR rubber diaphragm
- MIG welding eliminates interior rough spots and sharp edges
- Each tank is factory leak tested to ensure tank integrity
- All diaphragms designed to maximize drawdown
- External baked epoxy-polyester coating provides a durable appliance finish
- Welded side outlet allows easy and quick installation
- Protected pre charge valve eliminates potential leak path
- Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle
Additional Description
- Shell: Carbon Steel
- Connection: Carbon Steel
- Diaphragm: SBR Synthetic Rubber
- Color: Gray
Operating Conditions
- Max. Operating Pressure: 75 PSI
- Operating Temperature: 210 Degrees Fahrenheit
- Factory Precharge: 12 PSI
- Warranty: 1 Year
Specifications
- Model Number: FTH15
- Tank Size: 2.1 Gallons
- Tank Weight: 4.6 Pounds
- Connection Size (National Pipe Thread): 1/2 Male Iron Pipe (MIP)
- Dimensions (LxWxH): 9 x 9 x 13
- Acceptance Volume: 1.4 Gallons
- UPC Code: 80459513060
....read more
Tags: Expansion, Flextrol, FTH15, FTH30, Gallons, hydronic, Tank
Posted in Burnham Hydronics | No Comments »
January 20th, 2019
| KS2004 Quiet One $165.99 Kickspace Heater, Product Type FHW, BTU/Hour 5000BTU, Size 10-7/8x13-7/8x3-1/2IN, Heat Throw 7LNR FT, Input Supply Rating 120V/60HZ/1A, Additional Information Ideal for Those Hard to Heat Areas, Low Noise, Low Vibration Fan, Installer Friendly, Maximum-Off-Minimum Controls ....read more |
Kickspace Heater, Product Type FHW, BTU/Hour 5000BTU, Size 10-7/8x13-7/8x3-1/2IN, Heat Throw 7LNR FT, Input Supply Rating 120V/60HZ/1A, Additional Information Ideal for Those Hard to Heat Areas, Low Noise, Low Vibration Fan, Installer Friendly, Maximum-Off-Minimum Controls
....read more
Tags: 2000, 4000, Brown, hydronic, Kickspace, KS2004, One, Quiet, QuietOne, Series
Posted in Burnham Hydronics | No Comments »
December 20th, 2018
| CAI - CLASSIC $70.11 Rugged, high-capacity heater features 3/4 copper pipe with aluminum fins, 18-ga. front panel, and aluminum grille. Semigloss finish. Enclosure includes a back panel, support brackets, and element slide cradles. IBR approved (Institute of Boiler and Radiator Manufacturers).
Item: Hydronic Baseboard Heater
Housing Style: Conventional
Primary Application: Architectural
Mounting Type: Floor
Length: 24-3/4
Depth: 3-3/8
Height: 9-1/8
Color: White
Housing Material: Steel with Aluminum Grill
....read more |
Rugged, high-capacity heater features 3/4 copper pipe with aluminum fins, 18-ga. front panel, and aluminum grille. Semigloss finish. Enclosure includes a back panel, support brackets, and element slide cradles. IBR approved (Institute of Boiler and Radiator Manufacturers).
Item: Hydronic Baseboard Heater
Housing Style: Conventional
Primary Application: Architectural
Mounting Type: Floor
Length: 24-3/4
Depth: 3-3/8
Height: 9-1/8
Color: White
Housing Material: Steel with Aluminum Grill
....read more
Tags: -, Architectural, Baseboard, CAI, Classic, Conventional, Floor, Heater, hydronic, Length
Posted in Burnham Hydronics | No Comments »
December 12th, 2018
| Watts $393.01 Watts 0235097 Hp-30Pro-125 1-1/4 Inch Ips Hydronic Boiler Trim Package. ....read more |
Watts 0235097 Hp-30Pro-125 1-1/4 Inch Ips Hydronic Boiler Trim Package.
....read more
Tags: 0235097, 11/4, Boiler, Hp30Pro125, hydronic, Inch, Watts
Posted in Burnham Hydronics | No Comments »
Next Page »
More news