50k NEW STYLE Hydronic hanging heater w/CORD VARIABLE
March 2nd, 2020 | Badger Insulated Pipe $268.40 50,000 BTUs / 100 PSI Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling. New style makes your installation look much cleaner as both inlet and return pipes(The inlet/outlet ports are the same no matter which one you choose for hot or cold)come out next to each other on the top of the unit. This also makes the units much more efficent because no air becomes trapped in the unit. Other Sizes available,Units plug directly into a wall outlet! DOES NOT INCLUDE THERMOSTAT WITH THIS UNIT.Fan speed controlled with a Rheostat, which is included. These heat exchangers are to be hooked up to a boiler or a chilled water source. If using as a chilled water source, a drip pan will need to be provided by owner.BP-50Dimensions: Width = 15 ¾ Height = 12 Depth = 13 ½ including fan Outlet Port: 1 Weight = 24 lbs. - Shipping Weight = 32 lbs CFM =700 RHEOSTAT SPECS: *CURRENT CAPACITY: 15 AMPS*VOLTAGE CAPACITY: 120 AC*FUSE: 15 AMP*LINE CORD: 6 FT., 3-WIRE, DOUBLE INSULATED, 16 AWG, U.L. LISTED*PLUG: 3-POLE, AMERICAN (GROUNDED)*DIM: 4-3/8 (L) X 2-9/16 (W) X 2-3/4 (H)*WEIGHT: .95 LBS.These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units. These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow. We provide a 3 year warranty against manufacturer' ....read more  |
50,000 BTUs / 100 PSI Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling.
New style makes your installation look much cleaner as both inlet and return pipes(The inlet/outlet ports are the same no matter which one you choose for hot or cold)come out next to each other on the top of the unit. This also makes the units much more efficent because no air becomes trapped in the unit.
Other Sizes available,Units plug directly into a wall outlet! DOES NOT INCLUDE THERMOSTAT WITH THIS UNIT.Fan speed controlled with a Rheostat, which is included.
These heat exchangers are to be hooked up to a boiler or a chilled water source. If using as a chilled water source, a drip pan will need to be provided by owner.BP-50Dimensions:
Width = 15 ¾
Height = 12
Depth = 13 ½ including fan
Outlet Port: 1
Weight = 24 lbs. - Shipping Weight = 32 lbs
CFM =700
RHEOSTAT SPECS:
*CURRENT CAPACITY: 15 AMPS*VOLTAGE CAPACITY: 120 AC*FUSE: 15 AMP*LINE CORD: 6 FT., 3-WIRE, DOUBLE INSULATED, 16 AWG, U.L. LISTED*PLUG: 3-POLE, AMERICAN (GROUNDED)*DIM: 4-3/8 (L) X 2-9/16 (W) X 2-3/4 (H)*WEIGHT: .95 LBS.These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units.
These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow.
We provide a 3 year warranty against manufacturer' ....read more
More news