American Standard CE12AS 12 gallon Point of Use

July 16th, 2019

CE-12-AS
American Standard Water Heaters
$279.00
American standard water heaters point-of-use electric models are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under cabinets, counters, mop sinks or in other confined areas. Residential applications come with a 6 year limited tank and parts warranty. Commercial applications come with a 3 year limited warranty on the tank, and a 1 year parts warranty. ....read more
American standard water heaters point-of-use electric models are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under cabinets, counters, mop sinks or in other confined areas. Residential applications come with a 6 year limited tank and parts warranty. Commercial applications come with a 3 year limited warranty on the tank, and a 1 year parts warranty. ....read more

Flextrol FTH30 Hydronic Expansion Tank 2.1 Gallons for

July 15th, 2019

FTH15
Flextrol
$36.99

What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life.

Technical Features

  • Certified synthetic SBR rubber diaphragm
  • MIG welding eliminates interior rough spots and sharp edges
  • Each tank is factory leak tested to ensure tank integrity
  • All diaphragms designed to maximize drawdown
  • External baked epoxy-polyester coating provides a durable appliance finish
  • Welded side outlet allows easy and quick installation
  • Protected pre charge valve eliminates potential leak path
  • Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle

Additional Description

  • Shell: Carbon Steel
  • Connection: Carbon Steel
  • Diaphragm: SBR Synthetic Rubber
  • Color: Gray

Operating Conditions

  • Max. Operating Pressure: 75 PSI
  • Operating Temperature: 210 Degrees Fahrenheit
  • Factory Precharge: 12 PSI
  • Warranty: 1 Year

Specifications

  • Model Number: FTH15
  • Tank Size: 2.1 Gallons
  • Tank Weight: 4.6 Pounds
  • Connection Size (National Pipe Thread): 1/2 Male Iron Pipe (MIP)
  • Dimensions (LxWxH): 9 x 9 x 13
  • Acceptance Volume: 1.4 Gallons
  • UPC Code: 80459513060
....read more

What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life.

Technical Features

  • Certified synthetic SBR rubber diaphragm
  • MIG welding eliminates interior rough spots and sharp edges
  • Each tank is factory leak tested to ensure tank integrity
  • All diaphragms designed to maximize drawdown
  • External baked epoxy-polyester coating provides a durable appliance finish
  • Welded side outlet allows easy and quick installation
  • Protected pre charge valve eliminates potential leak path
  • Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle

Additional Description

  • Shell: Carbon Steel
  • Connection: Carbon Steel
  • Diaphragm: SBR Synthetic Rubber
  • Color: Gray

Operating Conditions

  • Max. Operating Pressure: 75 PSI
  • Operating Temperature: 210 Degrees Fahrenheit
  • Factory Precharge: 12 PSI
  • Warranty: 1 Year

Specifications

  • Model Number: FTH15
  • Tank Size: 2.1 Gallons
  • Tank Weight: 4.6 Pounds
  • Connection Size (National Pipe Thread): 1/2 Male Iron Pipe (MIP)
  • Dimensions (LxWxH): 9 x 9 x 13
  • Acceptance Volume: 1.4 Gallons
  • UPC Code: 80459513060
....read more

FloodStop Water Heater AutoShutoff Valve FS3/4NPT V4 Controller

July 15th, 2019

FS3/4NPT v4
FloodStop
$128.98
Prevent flood damage and avoid costly repairs with the easy-to-install, newly designed Lead free Water Heater Auto-Shutoff Valve. This system not only detects leaks early, but it automatically shuts your water off in the event of a leak, alerting you with the control panel's alarm. Designed for both residential and commercial dwellings. The FloodStop (FS 3/4-NPT) kit automatically shuts off the water supply to the Water Heater and sounds an alarm, leaving all other household fixtures and appliances operational. This kit includes everything you need to protect your property from costly water-leak damage: Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded), a water sensor to be placed on the floor, and the control unit, which is mounted to your wall with the included screws. A power supply is included; you need to also install four AA batteries (not included) for backup power, unit will beep to alert you of low or no batteries. The controller has one output contact (normally open) that can be attached to a dialer or security system so you can be alerted to a leak when not home! You can even add multiple water sensors for different areas around your water heater. If your water heater should begin to leak, the controller tells the water valve to close and alerts you with an 87db alarm. ....read more
Prevent flood damage and avoid costly repairs with the easy-to-install, newly designed Lead free Water Heater Auto-Shutoff Valve. This system not only detects leaks early, but it automatically shuts your water off in the event of a leak, alerting you with the control panel's alarm. Designed for both residential and commercial dwellings. The FloodStop (FS 3/4-NPT) kit automatically shuts off the water supply to the Water Heater and sounds an alarm, leaving all other household fixtures and appliances operational. This kit includes everything you need to protect your property from costly water-leak damage: Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded), a water sensor to be placed on the floor, and the control unit, which is mounted to your wall with the included screws. A power supply is included; you need to also install four AA batteries (not included) for backup power, unit will beep to alert you of low or no batteries. The controller has one output contact (normally open) that can be attached to a dialer or security system so you can be alerted to a leak when not home! You can even add multiple water sensors for different areas around your water heater. If your water heater should begin to leak, the controller tells the water valve to close and alerts you with an 87db alarm. ....read more

Central Boiler Outdoor Wood Furnace Solenoid 2000 and

May 31st, 2019

(2000 and newer)
Central Boiler
$32.15
Solenoid has a 1-3/8 center-to-center bracket hole (for models after June 2000, including all E-Classic models). ....read more
Solenoid has a 1-3/8 center-to-center bracket hole (for models after June 2000, including all E-Classic models). ....read more

Brazed Plate Heat Exchanger Stainless Steel SS316L 5×12

May 23rd, 2019

AB
$173.00
Built with high quality stainless steel 316L and 99.9% copper, this model produces a counter-current flow to maximize heat efficiency.
This product is highly efficient due to the corrugated plates which produce a high, turbulent flow in a true counter-current direction. With their compact size and reduced material content, they can be the most economical heat transfer choice.

Product Information and Specifications
Stainless Steel 316L/Copper 30 Plates
Port Size: 1 1/4 MPT
270,000 - 380,000 Btu/hr Capacity
Floor Heating Capacity: 380,000 Btu/hr
Floor Heating GPM (Boiler = 180F / System = 100F-130F): 22.4 GPM / 22.4 GPM
Domestic Hot Water Heating Capacity: 310,000 Btu/hr
Domestic Hot Water Heating GPM (Boiler = 180F / Pipe 40F-140F): 17 GPM / 5 GPM
Driveway Snow Melting Capacity: 270,000 Btu/hr
Driveway Snow Melting GPM (Boiler = 180F / 50% Glycol = 110F-140F): 17 GPM / 19 GPM
Min. Operating Temp.: -256F
Max. Operating Temp.: 482F
Design Pressure: 435psi
Test Pressure: 653psi
Materials: Stainless Steel 316L, 99.9% Copper
Dimensions: 5 x 12


Applications
Driveway Snow Melting
Domestic Hot Water Heating
Central Heating
Floor Heating
Radiator Heating
Heating and Cooling HVAC Installation
Solar Heating ....read more
Built with high quality stainless steel 316L and 99.9% copper, this model produces a counter-current flow to maximize heat efficiency.
This product is highly efficient due to the corrugated plates which produce a high, turbulent flow in a true counter-current direction. With their compact size and reduced material content, they can be the most economical heat transfer choice.

Product Information and Specifications
Stainless Steel 316L/Copper 30 Plates
Port Size: 1 1/4 MPT
270,000 - 380,000 Btu/hr Capacity
Floor Heating Capacity: 380,000 Btu/hr
Floor Heating GPM (Boiler = 180F / System = 100F-130F): 22.4 GPM / 22.4 GPM
Domestic Hot Water Heating Capacity: 310,000 Btu/hr
Domestic Hot Water Heating GPM (Boiler = 180F / Pipe 40F-140F): 17 GPM / 5 GPM
Driveway Snow Melting Capacity: 270,000 Btu/hr
Driveway Snow Melting GPM (Boiler = 180F / 50% Glycol = 110F-140F): 17 GPM / 19 GPM
Min. Operating Temp.: -256F
Max. Operating Temp.: 482F
Design Pressure: 435psi
Test Pressure: 653psi
Materials: Stainless Steel 316L, 99.9% Copper
Dimensions: 5 x 12


Applications
Driveway Snow Melting
Domestic Hot Water Heating
Central Heating
Floor Heating
Radiator Heating
Heating and Cooling HVAC Installation
Solar Heating ....read more

Armstrong 110223306 1/25 Horsepower Astro 230SS Wet Rotor

May 18th, 2019

Armstrong International
$236.93
Face to Face Dimension = 6-3/8. Astros are available with self-lubricated bearing, vent plug for initial purging, and dynamically balanced stainless steel rotor assembly. No need for mechanical seal; no coupler alignment failure. Pumps will accept flange sizes 3/4, 1, 1-1/4 & 1-1/2. Same flange to flange dimension as competitive small circulators. All Astros: 120 Volt/60Hz. Dayton 32UN10 ....read more
Face to Face Dimension = 6-3/8. Astros are available with self-lubricated bearing, vent plug for initial purging, and dynamically balanced stainless steel rotor assembly. No need for mechanical seal; no coupler alignment failure. Pumps will accept flange sizes 3/4, 1, 1-1/4 & 1-1/2. Same flange to flange dimension as competitive small circulators. All Astros: 120 Volt/60Hz. Dayton 32UN10 ....read more

Brazed Plate Heat Exchanger Stainless Steel SS316L 4×12

May 18th, 2019

AB
$157.00
Built with high quality stainless steel 316L and 99.9% copper, this model produces a counter-current flow to maximize heat efficiency.
This product is highly efficient due to the corrugated plates which produce a high, turbulent flow in a true counter-current direction. With their compact size and reduced material content, they can be the most economical heat transfer choice.
Product Information and Specifications
Stainless Steel 316L/Copper 20 Plates
Port Size: 1 MPT
160,000 - 240,000 Btu/hr Capacity
Floor Heating Capacity: 190,000 Btu/hr
Floor Heating GPM (Boiler = 180F / System = 100F-130F): 8.9 GPM / 8.9 GPM
Domestic Hot Water Heating Capacity: 240,000 Btu/hr
Domestic Hot Water Heating GPM (Boiler = 180F / Pipe 40F-140F): 14 GPM / 4 GPM
Driveway Snow Melting Capacity: 160,000 Btu/hr
Driveway Snow Melting GPM (Boiler = 180F / 50% Glycol = 110F-140F): 10 GPM / 11 GPM
Min. Operating Temp.: -256F
Max. Operating Temp.: 482F
Design Pressure: 435psi
Test Pressure: 653psi
Materials: Stainless Steel 316L, 99.9% Copper
Dimensions: 4 x 12


Boiler Plate Heat Exchanger Applications
Domestic Hot Water Heating
Central Heating
Floor Heating
Driveway Snow Melting
Radiator Heating
Heating and Cooling HVAC Installation
Solar Heating ....read more
Built with high quality stainless steel 316L and 99.9% copper, this model produces a counter-current flow to maximize heat efficiency.
This product is highly efficient due to the corrugated plates which produce a high, turbulent flow in a true counter-current direction. With their compact size and reduced material content, they can be the most economical heat transfer choice.
Product Information and Specifications
Stainless Steel 316L/Copper 20 Plates
Port Size: 1 MPT
160,000 - 240,000 Btu/hr Capacity
Floor Heating Capacity: 190,000 Btu/hr
Floor Heating GPM (Boiler = 180F / System = 100F-130F): 8.9 GPM / 8.9 GPM
Domestic Hot Water Heating Capacity: 240,000 Btu/hr
Domestic Hot Water Heating GPM (Boiler = 180F / Pipe 40F-140F): 14 GPM / 4 GPM
Driveway Snow Melting Capacity: 160,000 Btu/hr
Driveway Snow Melting GPM (Boiler = 180F / 50% Glycol = 110F-140F): 10 GPM / 11 GPM
Min. Operating Temp.: -256F
Max. Operating Temp.: 482F
Design Pressure: 435psi
Test Pressure: 653psi
Materials: Stainless Steel 316L, 99.9% Copper
Dimensions: 4 x 12


Boiler Plate Heat Exchanger Applications
Domestic Hot Water Heating
Central Heating
Floor Heating
Driveway Snow Melting
Radiator Heating
Heating and Cooling HVAC Installation
Solar Heating ....read more

100000 BTU Hot Water Hanging Heater / 100K

May 16th, 2019

2 speed 16x16 am W R
American Royal
$325.00
INCLUDES A 110V IN-LINE THERMOSTAT WITH WIRELESS REMOTE CONTROL AND A HARD TO FIND ON OFF ON SWITCH THAT LETS YOU CHANGE FAN SPEED WITH THE PUSH OF A BUTTON. UNLIKE OTHER THERMOSTATS, JUST PLUG INTO WALL SOCKET THEN PLUG THE POWER CORD FROM HEATER TO THE THERMOSTAT. MAKES LIFE SO MUCH EASIER. ALL NEW 2 SPEED BLOWER FAN. THE ONLY ONE WITH 2 SPEEDS OF THIS STYLE EXCLUSIVELY AT FREEHEAT4U. 100,000 BTU hanging air handler with 2 speed fan, unattached surge protector AND REMOTE THEROSTAT AND ON OFF ON SWITCH! This unit has adjustable louvers on the front so you can point the heat in the exact spot you want. This unit comes with pre drilled holes to make your hanging options easier. 1 copper ports make hook up a breeze! Great for garages, warehouses, greenhouses, etc. This is for hydronic heat, so works fantastic with wood boilers! Dimensions: Width = 19 ¾, Height = 16, Depth = 14 including fan. Weight = 34 lbs. FIRST SPEED 1600R/MIN. SECOND SPEED 1230R/MIN. Made of high quality materials for a long life. Comes with a pro-rated LIFETIME warranty in the event the unit freezes. You can contact us at 262-339-0061 or 920-838-1764 with questions, or to talk to our knowledgeable staff. TO PROTECT YOUR BLOWER FAN MOTOR WE NOW INCLUDE A UN ATTACHED 3 FT CORD WITH SURGE PROTECTOR. It protects your basic household electronics and home appliances from power surges with the Surge Protector. This power strip features a heavy-duty cord for durability. It offers a convenient reset switch to eliminate the need for unplugging. 4-surge protected outlets supply complete, 3-line AC protection. 3 ft. power cord delivers optimal, safe AC power through a 14-Gauge heavy-duty cord. 450 joule energy rating provides maximum protection of all your sensitive electronic devices. $50,000 connected equipment warranty FROM MFG. ....read more
INCLUDES A 110V IN-LINE THERMOSTAT WITH WIRELESS REMOTE CONTROL AND A HARD TO FIND ON OFF ON SWITCH THAT LETS YOU CHANGE FAN SPEED WITH THE PUSH OF A BUTTON. UNLIKE OTHER THERMOSTATS, JUST PLUG INTO WALL SOCKET THEN PLUG THE POWER CORD FROM HEATER TO THE THERMOSTAT. MAKES LIFE SO MUCH EASIER. ALL NEW 2 SPEED BLOWER FAN. THE ONLY ONE WITH 2 SPEEDS OF THIS STYLE EXCLUSIVELY AT FREEHEAT4U. 100,000 BTU hanging air handler with 2 speed fan, unattached surge protector AND REMOTE THEROSTAT AND ON OFF ON SWITCH! This unit has adjustable louvers on the front so you can point the heat in the exact spot you want. This unit comes with pre drilled holes to make your hanging options easier. 1 copper ports make hook up a breeze! Great for garages, warehouses, greenhouses, etc. This is for hydronic heat, so works fantastic with wood boilers! Dimensions: Width = 19 ¾, Height = 16, Depth = 14 including fan. Weight = 34 lbs. FIRST SPEED 1600R/MIN. SECOND SPEED 1230R/MIN. Made of high quality materials for a long life. Comes with a pro-rated LIFETIME warranty in the event the unit freezes. You can contact us at 262-339-0061 or 920-838-1764 with questions, or to talk to our knowledgeable staff. TO PROTECT YOUR BLOWER FAN MOTOR WE NOW INCLUDE A UN ATTACHED 3 FT CORD WITH SURGE PROTECTOR. It protects your basic household electronics and home appliances from power surges with the Surge Protector. This power strip features a heavy-duty cord for durability. It offers a convenient reset switch to eliminate the need for unplugging. 4-surge protected outlets supply complete, 3-line AC protection. 3 ft. power cord delivers optimal, safe AC power through a 14-Gauge heavy-duty cord. 450 joule energy rating provides maximum protection of all your sensitive electronic devices. $50,000 connected equipment warranty FROM MFG. ....read more

Package Deal SP82 with 2 units of D135E

May 13th, 2019

SP-82PK1
Azel Technologies Inc.
$.
SP-82 and 2 units of D-135E thermostats: 2 ZONE CIRCULATOR PUMP CONTROL (SWITCHING RELAY) WITH PRIORITY FOR FOR HYDRONIC RADIANT FLOOR HEATING SYSTEMS AND 2 UNITS OF NON-PROGRAMMABLE DIGITAL THERMOSTATS The i-Link series 2-zone hydronic radiant floor heating switching relay for pump / circulator control is operated by low voltage thermostats or any other low voltage controllers having an SPST switching action. The i-Link controller provides intermediate switching to permit up to 2 circulators and a boiler operating control in a multi-zone hydronic heating system. Intelligent Linking System (i-Link) allows unlimited zone expansion with additional i-Link controllers. Field selectable priority with timer prevents freeze-ups in the event of a priority zone failure. Unique power surge protection to avoid damage to the unit and ensure continuous control operation. The panel provides EZ screwless terminal blocks for connections to the thermostats. LED indicators on the front panel provides functional status and easy troubleshooting. In addition, a system circulator is turned on whenever any zone calls for heat. Product Features and Benefits: * Front panel indicator lights * Field selectable priority * Unlimited zone expansion * Capable of turning on extra system circulator * Compact and modern design * Fuse protection * Power surge protection * Safety design with all electronic components hiding behind the enclosure * Simplified wiring * Contractor friendly PCB layout * High Capacity Field Replaceable Transformer * 24VAC transformer output with common terminal provides compatibility with electronic thermostat * Universal thermostat compatibility * Extended 3 year warranty D-135E: DIGITAL NON-PROGRAMMABLE THERMOSTAT Product Info: www.azeltec.com ....read more
SP-82 and 2 units of D-135E thermostats: 2 ZONE CIRCULATOR PUMP CONTROL (SWITCHING RELAY) WITH PRIORITY FOR FOR HYDRONIC RADIANT FLOOR HEATING SYSTEMS AND 2 UNITS OF NON-PROGRAMMABLE DIGITAL THERMOSTATS The i-Link series 2-zone hydronic radiant floor heating switching relay for pump / circulator control is operated by low voltage thermostats or any other low voltage controllers having an SPST switching action. The i-Link controller provides intermediate switching to permit up to 2 circulators and a boiler operating control in a multi-zone hydronic heating system. Intelligent Linking System (i-Link) allows unlimited zone expansion with additional i-Link controllers. Field selectable priority with timer prevents freeze-ups in the event of a priority zone failure. Unique power surge protection to avoid damage to the unit and ensure continuous control operation. The panel provides EZ screwless terminal blocks for connections to the thermostats. LED indicators on the front panel provides functional status and easy troubleshooting. In addition, a system circulator is turned on whenever any zone calls for heat. Product Features and Benefits: * Front panel indicator lights * Field selectable priority * Unlimited zone expansion * Capable of turning on extra system circulator * Compact and modern design * Fuse protection * Power surge protection * Safety design with all electronic components hiding behind the enclosure * Simplified wiring * Contractor friendly PCB layout * High Capacity Field Replaceable Transformer * 24VAC transformer output with common terminal provides compatibility with electronic thermostat * Universal thermostat compatibility * Extended 3 year warranty D-135E: DIGITAL NON-PROGRAMMABLE THERMOSTAT Product Info: www.azeltec.com ....read more

Condensate Neutralizer Kit for Burnham Alpine Boiler

May 8th, 2019

Burnham
$70.43
Condensate neutralizer kit for Burnham Alpine gas boilers. Follow local codes and instructions enclosed with the kit for condensate neutralizer installation. ....read more
Condensate neutralizer kit for Burnham Alpine gas boilers. Follow local codes and instructions enclosed with the kit for condensate neutralizer installation. ....read more